深圳市奥德赛创精密仪器有限公司 收藏

瑞典FRIBORG喷淋防水试验机6100C

喷淋防水试验机– 型号6100C

这是一款新设计的喷水试验机，有一个机箱用于保护弯管。

这款喷水试验箱是依据IP等级标准IEC 60529 图4设计制造。设备从装在半弧形摆管上的喷头中向试样喷水。只适用于200-400mm半径的摆管。

瑞典FRIBORG喷淋防水试验机6100C中国经销价技术参数

• 摆管: 200 mm和400 mm半径

• 这是一台电动设备，有一个电动气缸可以转动± 170°、(± 90°) 以及± 60°角。选择角度可以用一个双（三）档开关。气缸转动时气缸上的传感器会显示转动角度。

• 摆管测试时，两个支角支撑摆管的位置。一个支角是电机驱动气缸转动的，另一个支角是用来支撑水管的。

• 转动载物台是一个直径200mm的圆形。转动速度为1rpm。驱动是一个齿轮驱动三相电机。电机的电源是一个变频转换器。测试物品不能超过30KG。

• 特殊设计的喷嘴可以调节水柱的方向。喷嘴喷水口直径。

• PLC 控制

 瑞典FRIBORG喷淋防水试验机6100C中国经销价

标准：IEC:60529 Fig.4

重量：200 kg

尺寸：1200x1200x1600 mm (LxWxH)

电源：230/115 VAC 50/60 Hz

 


Spray Tester - Model 6100C

A new designed Spray test with a chamber protecting the arcs. 

The Spray Test Chamber works according to the IEC 60529 Fig.4 - standard for IP-classifications. The equipment sprays water on samples with water beams coming nozzles mounted on oscillating half arcs (tubes). Only for arcs 200-400 mm radii.

Technical specifications

• For arcs: 200 mm radii 400 mm radii

• The drive is electric with an electric cylinder moving angles ± 170 deg. (± 90 deg.) ± 60 deg. Angles are selected with a two (three) position switch. Sensors on the cylinder indicate angles when the cylinder reverses

• Two stands hold the arcs in the position during oscillation. One stand is for the electrical drive of the cylinder the other stand is used for holding the tube.

• Turn table is circular with a diameter of 200 mm. The rotation speed is 1 rotation/minute. The drive is a three phase motor with gears. Electrical supply to the motor is a converter with variable frequency. For test objects to max 30 Kg

• Specially designed nozzles allow the direction of the water beams to be adjusted. Nozzle channel has a diameter 0,4 mm

• PLC controlled

•